Course Outline

Follow the instructions in your cleaning kit. If possible, clean the barrel from the breech end, using a bore guide and a cleaning rod holding a bore-brush or patch, wetted with solvent. Pass the brush/patch all the way through the barrel. Repeat several times with fresh patches. You may need a larger brush for the chamber. Use a hand brush to clean the crevices where powder residue accumulates. Follow with a dry patch, and finish with a lightly oiled patch for the barrel. Use a cloth for the other parts.

A Cleaning Kit for Firearms

Clean your ammunition by wiping it with a cleaning cloth. If the ammunition is not clean, particles of sand or dirt can scratch the bore.

Use cleaning solvents in a well-ventilated area and only as directed.

If cleaning from the muzzle end, use a muzzle protector so that you don’t damage the rifling near the muzzle.

  • Unit 2 of 6
  • Topic 9 of 10
  • Page 3 of 5